Device features
Available colours

Grey platine

Grey graphite

Alpine white


Louisiana wenge

Standard equipment


  • icon
    Straight sides made of laminated board, decor to be chosen from the RAPA pattern
    Wybór dekorów ze wzornika RAPA
  • icon
    Shelf edge strips
  • icon
    Top mirrors
  • icon
    Adjustable legs made of stainless steel
  • icon
    Grey bumpers made of soft PVC (2 pcs.)
  • icon
    Possibility of connecting in series lines
  • icon
    Warm white colour of shelves lighting
  • icon
    Shelves adapted to containers of the dimensions of 60x40 cm
  • icon
    Beech shelves, leaning
  • icon
    Partitions made of laminated board in the bottom shelf
  • icon
    Sliding crumb tray made of stainless steel
  • icon
    Front finish of the device made of steel powder-painted in colour chosen from the RAPA colour chart
Show equipment detailsHide details

Additional equipment

Additional equipment

  • icon
    Sliding curtain made of PET
  • icon
    Built-in device (without sides and panels)
    minus 240 i minus 280
Show equipment detailsShow equipment details

rated voltage 230 V~ / 50 Hz
rated power 30 W ÷ 143 W
model RW-A 45/100 RW-A 86/100 RW-A 126/100 RW-A 167/100 RW-A 207/100
width 45 86 126 167 207
exposition width 41 82 122 163 203
depth 100 100 100 100 100
height 203 203 203 203 203

There are no files in this category

There are no files in this category

Catalogues and products cards
Katalog produktow - Product catalog - RAPA
18,822 KB
Price lists
01-30_CENNIK_RAPA_Producent Urzadzen Chlodniczych_PL_2020v1
2,706 KB
02_CENNIK_RAPA_spis tresci - opis kodow_PL_2020v1
1,397 KB
29_CENNIK_RAPA_regały warzywnicze i moduly_PL_2020v1
1,415 KB
There are no files in this category
User manuals
There are no files in this category
Certificates of conformity
There are no files in this category
Colour chart
There are no files in this category
Technical drawings
There are no files in this category
There are no films in this category

Check also

Service vademecum #2 - replacement of the temperature controller

May 14, 2020 00:00

Welcome to the next service handbook. In today's installment, we will replace the temperature controller. The exchange is relatively simple but it is worth emphasizing that it should be carried out by a person with electrical qualifications. We have prepared the guide in the form of a short step-by-step description and video material.

Replacing the temperature controller

krok 1

Turn off the device

Before replacing the temperature controller, turn off the device using the main switch. Then turn off the device from the power supply.

Disassemble the temperature controller

With a flat, small screwdriver, we gently pry up the housing frame. Then unscrew the screws with a Phillips screwdriver. Gently remove the controller.

krok 2
krok 3

Disconnect the temperature controller

Before replacing the controller, it is worth taking a photo of it, which will help us connect the cubes in the correct order. After taking the picture, we can detach the cubes from the controller.

We plug in a new temperature controller

In the new controller, we connect the cubes in the correct order. Let's make sure they snap properly. After this action, the controller is inserted into the mounting hole and tightened again gently by making a few turns with a Phillips screwdriver. Then we put on the protective frame. The device can be switched back to the power supply and turned on by the main switch.

krok 4



See the video guide


RAPA new in offer - LK-SiX/X cash counter

May 14, 2020 00:00
Dear Sirs,

Service vade mecum #1

April 28, 2020 00:00

Welcome to the service vade mecum. We are starting a thematic cycle in which we will focus on the most important service and maintenance works that will be useful to both professional service technicians and owners of refrigeration equipment. A little "basics" to get you started.


What is worth remembering?


Cleaning the condenser

First of all, remember to clean the condenser regularly. With a clean condenser, we avoid compressor breakdowns, prevent excessive energy consumption,
and ensure adequate cooling capacity.

A large amount of ice accumulates on the evaporator

Perform the following actions:

  1. take out the goods,
  2. carry out the defrosting process by turning the device off until the ice melts,
  3. pay attention to the condition of condensate in the container to prevent water from spilling onto the floor,
  4. turn the device on again.
oszroniony parownik
błąd E1

E1 message on the display

Perform the following actions:

  1. defrost the device if possible by manually switching off the unit for 30-40 minutes.
  2. repeat activity 2-3 times a day.



Cleaning condensers in upright refrigerated cabinets
with top and bottom mounted unit